Supply Square
Showcase service capabilities and connect with 1,000+ quality buyers worldwide
0
Total Capabilities
0
Total Views
0
Total Inquiries
0
Total Transactions
New technology for the production of 1,2-dichloroethane from ethylene glycol
2026-08-19 14:45:42
0
0
0
1,2-Dichloroethane is a key intermediate in the VCM/PVC industry chain, and the traditional route relies on the direct chlorination or oxidation of ethylene. This technology has opened up a new route for the production of 1,2-dichloroethane from ethylene glycol, in which the two hydroxyl groups of ethylene glycol are converted into chlorine atoms through chlorination substitution, resulting in the target product. This route provides a pathway for the enrichment of ethylene glycol production capacity (especially coal-based ethylene glycol) to the downstream chlor-alkali-PVC industry chain, and also provides an alternative raw material option for ethylene resource-constrained owners. The raw material route is flexible and can be directly connected to existing VCM cracking to chlorine ethylene units. The technology has been built and commissioned in a pilot plant, which has verified the feasibility of the process and has the basis for process scaling. The service provided includes process package authorization, raw material adaptation evaluation, basic design support, corrosion-resistant equipment selection recommendations, commissioning guidance, and operation training, and the owner needs to provide a chlorine source and corresponding utilities.
Petrochemical and Coal Chemical Industries
Chemical Engineering Technology Research and Development and Process Package
Russia
Kazakhstan
Kyrgyzstan
Tajikistan
Turkmenistan
Uzbekistan
Middle East
T - Technology & Patents
>30 daysFormaldehyde iron molybdenum anti-inactivation catalyst technology
2026-08-19 14:45:31
0
0
0
The catalyst stability directly determines the operating cycle and economic efficiency of the methanol oxidation to formaldehyde plant. Molybdenum migration loss and surface carbon are the two main causes of the catalyst deactivation. This technology starts from the catalyst formulation and structure, and through the adjustment of additives and optimization of the preparation process, it strengthens the fixation of molybdenum species, improves the distribution of acid and alkali on the surface, significantly slows the loss of active components and the rate of carbon deposition, extends the catalyst service life, stabilizes the formaldehyde yield, and reduces the frequency of shutdown and replacement and the unit cost. The anti-deactivation catalyst is compatible with the existing industrial installations using the iron-molybdenum method, and no large-scale modifications are required to replace it. The technology has been built and commissioned in a pilot plant, which has verified the performance of the catalyst and the feasibility of scale-up production, and has the basis for process scale-up. It is suitable for formaldehyde production enterprises and catalyst manufacturers. It can provide catalyst product technology authorization, preparation process support, filling and operation scheme design, deactivation diagnosis, and service recommendations for life management.
Petrochemical and Coal Chemical Industries
Chemical Engineering Technology Research and Development and Process Package
Russia
Kazakhstan
Kyrgyzstan
Tajikistan
Turkmenistan
Uzbekistan
Middle East
T - Technology & Patents
>30 daysTechnique for recovery and reuse of formaldehyde iron-molybdenum deactivation catalysts
2026-08-19 14:45:21
0
0
0
This technology is aimed at the recovery and reuse of iron-molybdenum catalysts that have become inactive due to factors such as molybdenum volatilization and carbon accumulation. By separating the components of the catalyst and chemically regenerating them, effective components such as molybdenum and iron can be recovered and the catalyst's activity can be restored or partially restored. The regenerated catalyst can be downgraded or reused in proportion to industrial installations, while the recovered metal components can be used as raw materials in the production of new catalysts, achieving a resource closed loop and reducing the amount of hazardous waste disposal and the cost of purchasing fresh catalysts. This technology has been built and commissioned in a pilot plant, which has verified the feasibility of the process and has the basis for process scaling. It is suitable for methanol production enterprises and catalyst recovery and treatment service providers. It can provide license for the recovery process, design support for regeneration plants, operation diagnosis and operation training, and other services.
Petrochemical and Coal Chemical Industries
Chemical Engineering Technology Research and Development and Process Package
Russia
Kazakhstan
Kyrgyzstan
Tajikistan
Turkmenistan
Uzbekistan
Middle East
T - Technology & Patents
>30 daysDiisopropyl ether oxidation technology for high-concentration formaldehyde
2026-08-19 14:45:10
0
0
0
High-concentration formaldehyde is an important raw material for synthetic resins, engineering plastics, and a variety of fine chemicals. The traditional methanol oxidation method is limited by equilibrium and by-product water, making it difficult to directly obtain high-concentration formaldehyde and requiring high energy consumption for concentration. In this technology, dimethyl ether is used as the raw material for catalytic oxidation, with less water introduced in the reaction pathway, which can directly produce high-concentration formaldehyde products, significantly reducing the energy consumption and equipment investment required for subsequent dehydration and concentration. Dimethyl ether can be conveniently produced from methanol dehydration, and the raw material route is smoothly integrated with existing coal chemical and natural gas chemical industry chains. This technology is suitable for extending from areas with abundant methanol production capacity to downstream facilities, as well as for facilities with high formaldehyde concentration requirements, such as polyformaldehyde. At present, a pilot plant has been built and commissioned, verifying the feasibility of the process and providing the basis for process scaling. The company can provide process package licensing, catalyst and reactor selection recommendations, basic design support, commissioning guidance, and operation training services, with the customer needing to provide either methanol or dimethyl ether as the raw material.
Petrochemical and Coal Chemical Industries
Chemical Engineering Technology Research and Development and Process Package
Russia
Kazakhstan
Kyrgyzstan
Tajikistan
Turkmenistan
Uzbekistan
Middle East
T - Technology & Patents
>30 daysEthanol dehydrogenation and esterification to produce ethylene glycol and hydrogen simultaneously
2026-08-19 14:45:00
0
0
0
Acetyl acetate is a widely used green solvent. The traditional esterification route requires two steps of acetic acid and ethanol as raw materials, with a long process and high energy consumption. This technology uses ethanol as a single raw material and converts it into acetyl acetate in one step under the action of a specialized catalyst, while simultaneously producing hydrogen gas. The process route is short, the atom economy is high, and there are no problems with corrosion and waste liquid caused by strong acid catalysts. The hydrogen gas produced can be reused in the plant's hydrogenation equipment or as an energy product, thereby improving the overall economy. This route is particularly suitable for owners with abundant ethanol resources (biological ethanol or synthetic ethanol) and a demand for acetyl acetate, enabling a single plant to produce two products. The technology has been built and commissioned in a pilot plant, which has verified the feasibility of the process and has the basis for process scaling. The owner needs to provide the necessary conditions for the supply of ethanol raw materials and product storage and transportation.
Petrochemical and Coal Chemical Industries
Chemical Engineering Technology Research and Development and Process Package
Russia
Kazakhstan
Kyrgyzstan
Tajikistan
Turkmenistan
Uzbekistan
Middle East
T - Technology & Patents
>30 daysPhase change temperature control additive preparation technology
2026-08-19 14:44:49
0
0
0
Phase change thermal control materials rely on solid-liquid or solid-solid phase change processes to absorb and release latent heat, enabling the storage and transport of heat under near-constant temperature conditions. They are key functional materials in fields such as building energy conservation, industrial waste heat utilization, cold chain transportation, and thermal management of electronic devices. This technology focuses on the formulation and preparation of phase change thermal control materials. Through coordinated design of base material selection, phase change temperature range control, packaging and molding, and heat transfer enhancement, the products have high phase change enthalpy, low supercooling, and good cycle stability, and can be customized according to application scenarios in terms of phase change temperature and form (molded plates, microcapsules, composite blocks, etc.). The technology has been built and commissioned a pilot facility, which has verified the feasibility of the process and has the basis for process scaling. It is suitable for enterprises engaged in energy-saving materials and thermal management products to adopt. Services such as material formulation and preparation process authorization, application adaptation recommendations, production line design support, commissioning guidance, and operation training are available.
New Materials and Polymer Materials
Chemical Engineering Technology Research and Development and Process Package
Russia
Kazakhstan
Kyrgyzstan
Tajikistan
Turkmenistan
Uzbekistan
Middle East
T - Technology & Patents
>30 daysCatalytic refining of plant waste to produce low-carbon natural gas
2026-08-19 14:44:38
0
0
0
The technology uses plant waste such as straw and forestry residues as raw materials, and through a catalytic refining process, converts the carbon source in the biomass into low-carbon natural gas, mainly methane. After purification and quality improvement, the product can meet the standards for pipeline transportation or vehicle gas, and can be integrated into the existing natural gas pipeline network or used as a transportation fuel, with a significantly lower carbon footprint than fossil natural gas. The technology has a strong adaptability to raw materials, and the catalytic system balances conversion efficiency and methane selectivity, and the by-products can be utilized. The technology has been built and commissioned in a pilot plant, which has verified the feasibility of the process and has the basis for process scaling. It is suitable for regions with abundant biomass resources, with gas transportation conditions, or for owners who are developing bio-natural gas. The service provided includes process package authorization, catalyst and key equipment selection recommendations, basic design support, driving guidance, and operation training.
Petrochemical and Coal Chemical Industries
Chemical Engineering Technology Research and Development and Process Package
Russia
Kazakhstan
Kyrgyzstan
Tajikistan
Turkmenistan
Uzbekistan
Middle East
T - Technology & Patents
>30 daysPlant solid waste coupling water green hydrogen technology
2026-08-19 14:44:28
0
0
0
Using agricultural and forestry waste and other plant solid waste as raw materials, and coupling them with water to produce green hydrogen is a new approach that combines biomass resource utilization with green hydrogen production. Through thermal chemical or catalytic conversion processes, the carbon-hydrogen components in plant solid waste are converted together with water to produce hydrogen-rich gases, which, after conversion and purification, yield high-purity hydrogen gas. This not only disposes of dispersed biomass resources such as straw and wood chips, but also produces zero-carbon hydrogen energy products. By-product gases and residues can be further utilized in a comprehensive manner, achieving a closed resource cycle. This approach provides a new option for hydrogen production in regions where there is a lack of cheap wind and solar power but abundant biomass resources, and it can be coupled with existing biomass energy parks. The technology has been built and commissioned in a pilot plant, which has verified the feasibility of the process and has the basis for process scaling up. It is suitable for parks and energy enterprises with stable biomass raw materials. We can provide process package licensing, raw material pretreatment solutions, basic design support, commissioning guidance, and operation training, among other services. The owner needs to address the storage, transportation, and utility engineering aspects of the raw materials.
Petrochemical and Coal Chemical Industries
Chemical Engineering Technology Research and Development and Process Package
Russia
Kazakhstan
Kyrgyzstan
Tajikistan
Turkmenistan
Uzbekistan
Middle East
T - Technology & Patents
>30 daysProduction technology of low-short-chain medium-long-chain chlorinated paraffin
2026-08-19 14:44:17
0
0
0
In response to the increasingly stringent control of short-chain chlorinated paraffin by the international community, the control of short-chain content in medium- and long-chain chlorinated paraffin products has become a hard indicator for industry access. This technology is aimed at this compliance requirement and takes a synergistic approach from both ends of the raw material wax distillation and fractionation and chlorination processes. By precisely controlling the carbon number distribution of the raw material, optimizing the temperature and mass transfer conditions of the chlorination reaction, and inhibiting the introduction and decomposition of short-chain components, the short-chain content in medium- and long-chain chlorinated paraffin products can be stably controlled to meet regulatory requirements. The products can be used as PVC auxiliary plasticizers, rubber and paint flame retardant plasticizers, metal processing fluid pressure agents, and so on. The technology has been built and commissioned in a pilot plant, which has verified the feasibility of the process and has the basis for process scaling. It is suitable for paraffin chlorination production enterprises to upgrade their products and for enterprises planning to enter this field and target export compliance markets. Services such as process package licensing, raw material fractionation scheme design, basic design support, commissioning guidance, and operation training are available.
Fine Chemical Manufacturing
Chemical Engineering Technology Research and Development and Process Package
Russia
Kazakhstan
Kyrgyzstan
Tajikistan
Turkmenistan
Uzbekistan
Middle East
T - Technology & Patents
>30 daysTechnique for the production of 2-amino-4-acetamidoanisole
2026-08-19 14:44:06
0
0
0
As a key intermediate for disperse dyes (especially deep blue disperse dyes), the quality of 2-amino-4-acetamidoaniline directly affects the color and fastness of the dye. This technology uses aminoxybenzenes as the starting material, and through steps such as acetylation, nitration, and reduction, the target product is synthesized. By optimizing the reaction conditions and crystallization purification process, the product has high purity, low impurity content of isomers, and stable batch quality, meeting the raw material requirements for high-end dye synthesis. The process has been designed to be green in terms of solvent selection, mother liquor recycling, and waste liquid treatment, significantly reducing the environmental burden compared to traditional routes. The technology has been built and commissioned in a pilot plant, which has verified the feasibility of the process and has the basis for process scaling. It is suitable for dye intermediate production enterprises and owners who have integrated the dye industry chain. The owner must have the corresponding fine chemical production qualifications and waste treatment facilities.
Fine Chemical Manufacturing
Chemical Engineering Technology Research and Development and Process Package
Russia
Kazakhstan
Kyrgyzstan
Tajikistan
Turkmenistan
Uzbekistan
Middle East
T - Technology & Patents
>30 days
SRC Posts
Featured Services
Latest
TrendingGlobal International Logistics (Sea, Air, Rail, Road, etc.) Services
• Certification7
0
China Merchants Group member Sinotrans Northeast Co., Ltd., established in 2002, is located in Dalian City, Liaoning Province. It is an enterprise mainly engaged in multimodal transport and transportation agency business. The registered capital is RMB 150 million, with paid-in capital of RMB 150 million. It is a national 5A-level logistics enterprise, a CUSTOMS AEO Advanced Certified enterprise, and holds ISO 9001, ISO 45001, ISO 27001, and military standard GJB 9001C certifications.
The company can undertake non-vessel operating common carrier (NVOCC) business for cargo transportation entering and leaving Chinese ports; handle international transportation agency business for import and export goods by sea, land, and air, international exhibits, personal belongings, and transit goods, including: cargo solicitation, booking, warehousing, transit, container stuffing and unstuffing, settlement of freight and miscellaneous charges, customs declaration, inspection declaration, insurance, related short-distance transportation services, and transportation consulting business; handle international multimodal transport business; provide freight forwarding, ship agency, and logistics consulting services; conduct logistics technology R&D services; sell daily necessities, hardware and electrical products, chemical products, mineral products, textiles and garments, shoes and hats, machinery and equipment, and electromechanical products; engage in general cargo transportation, specialized cargo transportation (containers, refrigerated and fresh-keeping), oversized cargo transportation; ship agency and freight forwarding; act as agent for entry-exit inspection and quarantine declaration; and handle import and export of various goods and technologies on its own behalf or as an agent.
P - Procurement
C - Construction
H - Human Resources
Industrial Building and Structure Design
• Certification162
0
"We have rich practical experience in designing industrial buildings and structures in chemical plant areas, having completed design tasks for hundreds of factories, warehouses, frameworks, pipe racks, equipment foundations, office buildings, and other structures. This covers various types including new construction, reconstruction, and reinforcement. The industrial NDT workshop design once won a city-level excellent engineering design award.
Our design capabilities include steel structure workshops, reinforced concrete frame structures, independent equipment foundations, large-span warehouses, explosion-proof workshops, and we can provide comprehensive civil design services for chemical construction projects."
E - Engineering Design
Pressure Vessel Design
• Certification143
0
Possesses the capability for single pressure vessel design and has completed design work for various types of pressure vessels, including distillation columns, reboilers, expanders, and reactors. Design projects cover Class III pressure vessels, with familiarity with current domestic pressure vessel design standards and manufacturing inspection codes.
Provides full-process services ranging from process condition confirmation, strength calculation, and structural design to the publication of fabrication drawings. Also offers design technical support and certification assistance for equipment manufacturing enterprises.
E - Engineering Design
Our platform connects you with Belt and Road international markets, helping you build fast-track partnerships and unlock new business opportunities.
+ Showcase Capability Now
Over 1,200+ users have successfully connected on this platform.
